The cart is empty

Cannot find your purchased courses? Click here to Login!

For an air brake exam; you must know how to test the compressor.

Air Brakes | The Compressor



The only difference between a compressor on an air brake equipped vehicle and one that you would find in a garage or shop is that the one in the air brake equipped vehicle runs the entire time that the motor is running.

And we use the governor to control the compressor on an air brake equipped vehicle.

PASS CDL Air Brakes First Time - take this comprehensive course!
A course for truck, bus & RV drivers operating a vehicle fitted with air brakes.
This self-paced course gives you:
    • • more than 100 practice test questions with feedback;
      • EASY step-by-step instructions how to conduct a pre-trip inspection on an air brake system;
      • DETAILED rules to use air brakes and brake downhill with a large vehicle safely;
      • step-by-step instructions and precise wording for pre-trip inspection of trailers with airbrakes;
      • explained SIMPLY to you is the tractor protection system and its components.
 Illustrations, checklists, & cheat sheets ensure your success 

Cart and Checkout

An air brake compressor is bolted to the side of the diesel engine and works the same as an air compressor in a garage.Gear Driven Compressors

Talking today about the compressor on an air brake equipped vehicle.

In this day in age, all compressors on an air brake equipped vehicle are bolted right to the side of the engine - they are gear driven.

Now, in all the manuals it will say that some of them are belt driven.

They haven't been belt driven since the nineteen seventies - almost 45 years; however, if they are belt driven and you do have to check belt as part of the pre-trip inspection on your unit; halfway between the two pulleys, push down on the belt.

If it goes more than its own width, the belt probably needs to be adjusted and tightened up.

So that's the way you check the tension on belts.

And in the rare case that the compressor might be belt driven.

Compressors are Parasites

Compressors on air brake systems are truly parasitic.

They take power from the motor to be operated.

They use the engine's lubricating system to be lubricated and cooled.

As well, they use the engine's intake system to filter air into the system and compress it into the air brake system - air tanks and whatnot.

And in some rare cases, they use the engine's cooling system as well to cool the compressor.

In most instances, however they're just air cooled.

There's just fins on the side of the compressor and they are cooled.

So the air compressor on an air brake equipped vehicle is truly parasitic.

It uses everything from the engine to do what it needs to do.

Internal Workings of a Compressor

The internal workings of an air compressor on an air brake equipped vehicle is very similar to an internal combustion engine.

There's a piston inside of the compressor that's on a crankshaft.

The crankshaft is turned by the power from the engine.

The piston goes down, creates a vacuum.

The intake valve opens and it sucks air in.

It's very much like a plunger in a syringe: you pull it down, it creates a vacuum and sucks liquid into the needle.

An air compressor does the same.

The piston goes down creates vacuum and sucks air into the piston chamber, the intake valve closes, the exhaust port opens up, the piston comes back up on its compression stroke and pushes air into the system.

It's that simple.

Hot Air

We compress the air basic—principle of science—when you increase the pressure, you increase the temperature—the air coming out of the air compressor is 200°C or approximately 400° F.

The air is pushed into the wet tank on the older air brake systems, where it cools.

Cold air doesn't hold as much liquid as hot air, therefore the water inside the air cools & liquefies, and is collected in the bottom of the wet tank.

Thus we have a drain on the tank and any question on any air brake system will say how often do you drain tanks?

Daily, every day because the hot air cools, liquid condenses in the wet tank, and the tank has to be drained.

Air Dryer Integrated System

On newer systems— ADIS systems—that don't have a wet tank.

ADIS stands for air dryer integrated system.

It's just an air dryer and the air dryer is really good at purging out that liquid and any other sludge that might be created by the compressor and whatnot.

Compressor Supply Other Components

Compressors, as I mentioned, have an internal piston, depending on the size of the piston and the requirements of the air brake system, they can be one to four cylinders.

Keep in mind that these larger vehicles—buses and trucks and whatnot—don't just use the air from the air compressor for the air brakes.

It also uses it for the air ride suspension, the air cab, air ride seats, air locks, and those types of things.

In the old days, we used to have air windshield wipers, but the engineers kinda listened to the truck drivers because I'll tell you right now, I've sat in a few trucks with air windshield wipers.

There is nothing worse after eight hours.

They never really worked very well! So we've gone to electric windshield wipers.

They're not air anymore.

Don't Work the Day for Free:: Weigh Scale Checklist 

This checklist will provide you with a list of paperwork that you need to bring into the authorities when you get pulled into the scale house.

DID YOU KNOW? :: Bus & truck drivers are the only public sector that has its own police force (DOT, CVSE, MTO, etc.);

SMART :: There's a lot of paperwork you must produce for authorities at the weigh scale;

SELF-CONFIDENCE :: Bring all paperwork in one hit & impress the diesel bears!

Because in most cases, it's you that gets the fine...NOT the company!

Get Your Driver's Test Checklist Now!

For most states and provinces, this is how you test that the compressor is working on a CDL vehicle fitted with air brakes.Compressor Test

The other part that you need to do as part of your pre trip and your air brake pre trip inspection is you need to do a build-up test - a compressor test.

The compressor test in most provinces in Canada is fifty pounds per square inch to 90 pounds per square inch at a high idle within three minutes.

A couple of provinces—Newfoundland and Nunavut— are five minutes.

50 to 90 psi within three minutes.

Quebec doesn't have one - doesn't have a compressor test, which is odd.

And Ontario is 85 psi to 100 pounds per square inch at a high idle within two minutes.

I'll put a link down in the comment box here for the different requirements for a compressor test for the different provinces in Canada.

In the United States, just know you got to do a compressor test.

Look up whatever State you're in the CDL handbook - it's very easy to find out what that compressor test is.


In conclusion, compressor...bolted right on the side of the engine.

It runs the entire time that the engine is running.

The governor controls the compressor and I'll put a card here for the video on the governor rather.

The governor controls the compressor: puts it into the "load phase", the "unload phase"; "cut-in" or "cut-out" in Ontario and other jurisdictions.

The compressor is truly parasitic.

It takes power from the engine, uses the engine's lubricating system, the air intake, and in some cases the air cooling system.

As well, the lubrication system.

And the fins on the outside - most of them are air cooled.

The internal workings of a compressor is very similar to an internal combustion engine.

The intake stroke and a compression stroke.

It sucks air in and compresses it & pushes it into the wet tank or into the secondary and primary tanks on a ADIS system— air dryer integrated system.

All commercial drivers, as part of their license test, as part of ensuring the safe operation of the vehicle, must do a compressor test.

The compressor test is a set amount of time, it must build a set volume of air - usually 50 to 90 psi in most provinces within three minutes at high idle.


Log in to comment
blog image

Brake Fade | Air Brakes

Author: Rick
Although air brakes are more-or-less buletproof these, like all braking systems, have one failing: BRAKE FADE.
Default Image

Two-way Check Valves

Author: Rick
Must be used whenever two sources of air are used to operate a single device or system. For CDL air brake test, the driver must know there are 2 in the system.
Default Image

Trailer Hand Control (Spike)

Author: Rick
OBSOLETE Independently applies and releases the trailer service brakes. Knowledge Test Question: This air brake control is not to be used for parking. Although most tractors are still equipped with hand valves, beyond a trailer service tug test, these air…
On most trucks, the air lines to the trailer are plumbed into the tractor protection valve.

Tractor Protection Valve

Author: Rick
The tractor protection valve protect the tractors air supply from being depleted in the event of a trailer breakaway.
Default Image

Stop Light Switch

Author: Rick
Activates the brake lights when a service brake application is made by the driver.
Default Image

Spring Parking Brake (Emergency)

Author: Rick
Applies the parking brakes of the air brake equipped vehicle indefinitely – if needed of course. The parking brakes are held in the “ON” position by the mechanical force of the springs; these spring parking brakes are held in the “OFF” position by system air…
Default Image

Spring Brake Modulator (Inversion) Valve

Author: Rick
OBSOLETE Used on some vehicles with dual air systems. This device provides a means of using the force of the spring brakes to assist in stopping a vehicle in an event of a failure in the rear (primary) air system.
Default Image

Slack Adjuster

Author: Rick
Slack adjusters have three purposes: 1) To convert the forward linear motion of the push rod into rotary motion of the camshaft. The slack adjuster works on exactly the same principle as a box end wrench on a nut. 2) To act as a lever, thus generating greater…
Default Image

Air Tanks (Reservoirs)

Author: Rick
Stores compressed air for braking and for other air operated accessories. The air tanks are the first fail-safe in the air brake system. In the unlikely event that the air compressor fell of the side of the engine, the air tanks (reservoirs) store enough air…
The relay valve takes a message from the brake pedal and draws air directly from the air tank to the brake chamber, thus reducing brake lag.

Relay Valve

Author: Rick
Several relay valve throughout the air brake system reduce brake lag, thus allowing the brakes to apply faster.
Default Image

Relay Emergency Valve

Author: Rick
OBSOLETE Fills the trailer air tanks (reservoir) and applies and releases the trailer service brakes. The relay emergency valve also applies the trailer emergency brakes in the event of a trailer breakaway or normal disconnect. Knowledge Test Question: In the…
After a brake application, air is exhausted from the air brake system via the quick release valve to reduce brake lag.

Quick Release Valve

Author: Rick
The quick release valve moves to reduce brake lag in the air brake system.
You must know what a manual front wheel limiting valve is for your CDL air brake test. These are no longer found on modern trucks.

Manual Front Wheel Limiting Valve

Author: Rick
OBSOLETE To reduce application pressure to the steering axle by 50 % compared to the drive axle brakes, when required by reduced road conditions (rain, snow or ice). The system consists of a dash switch with 2 positions: Dry Road: 100% front wheel braking; in…
Air Brakes Simply Explained is a comprehensive manual that guarantees that you will pass your air brake ticket first time.

Brake Pedal - Foot Valve OR Treadle Valve

Author: Rick
MUST KNOW The brake pedal applies the service brakes - truck, or truck and trailer brakes. In other words, the brake pedal brings the vehicle to a stop when it it depressed. SHOULD KNOW The foot valve operates the secondary and primary sub systems…
Default Image

Compounding Air Brakes

Author: Rick
OBSOLETE Making a heavy service brake application while the parking brakes are applied. This is often an error of truck driving school students.
A caging bolt is used to release the emergency brakes in the event of an emergency (life or death situation).

Caging Bolt

Author: Rick
Allows the spring brakes to be manually released in an emergency - a dire emergency.
Default Image

Brake Linings & Drums

Author: Rick
To stop the vehicle, brake linings rub against the brake drum. This action creates friction, converting the vehicle's forward energy of motion into heat energy, which stops the vehicle’s tires. If the tires have traction, the vehicle will come to a stop. The…
Brake fade is the only reason that a modern air brake system will fail.

Brake Fade

Author: Rick
Brake faide is the only reason that a modern air brake system will fail.
A bobtail proportioning valve will move most of the braking to the front steer axles when there's not trailer attached.

Bobtail Proportioning Valve

Author: Rick
A bobtail proportioning valve great increases braking safety owing to different weight distribution.
Default Image

Automatic Front Wheel Limiting Valve

Author: Rick
To reduce application pressure to the steering axle brakes during most braking situations. Reduced pressure to the steer axle brakes occurs for most braking applications. Only during hard braking is there equivalent pressure delivered to both the front and…
Default Image

Air Gauge(s)

Author: Rick
The gauges are in either pounds per square inch (psi) or Kilopascals (kPa). These measure the amount of air pressure in the primary and secondary air tanks.
Default Image

Air Brake Chambers

Author: Rick
Convert air pressure into a strong mechanical force to apply the foundation brakes.
The one-way check valve is primary responsible for the division of the air brake system into a primary and secondary sub-system.

One-Way Check Valves

Author: Rick
A cattle chute with one-way gates allows the cows to only move in one direction – forward. A one-way check valve in an air brake system works exactly the same – it allows air to only move in one direction – forward through the system. The one-way check valves…
air brake adjustment

Air Brake Manual Adjustment – Pry Bar Method

Author: Rick
Using the pry bar method, confirm that the brake is in fact out of adjustment. After confirming that the brake is out-of-adjustment and it is equipped with a manual slack adjuster, complete the following steps to bring the brake back into adjustment. If one…
Default Image

Compressor or Build-up Test (Air Brakes)

Author: Rick
Depending on which province you're in, the air buildup time or compressor test has somewhat different paramenters. Still, all require that the diesel motor be at a fast idle. A fast idle on a diesel engine is between 900 &1200 rpm.
Default Image

Pry Bar - Check Air Brake Adjustment

Author: Rick
The National Safety Code madates that every driver of a commercial vehicle equipped with air brakes must check push rod travel every day. In many jurisdications, drivers are allowed to use the pry bar method; in others , they must use the applied stroke…
Default Image

Applied Stroke - Check Air Brake Adjustment

Author: Rick
The National Safety Code madates that every driver of a commercial vehicle equipped with air brakes must check push rod travel every day as part of his/her pre-trip inspection. In some jurisdications, drivers must use the applied stroke method; in others, they…

© Smart Drive Test Inc. 2024.

Contact Us: [email protected]